A rc boat stand is a great way to keep your boat organized and safe when not in use. There are a few different ways that you can build a rc boat stand, but this is the most basic and affordable option. You will need some basic materials including: plywood, 2x4s, screws, and nails.
Once you have gathered your supplies, follow these steps to build your own rc boat stand!
- Gather the materials you will need for the project including a piece of plywood, four dowel rods, and two L-brackets
- Cut the plywood into two equal rectangles using a saw
- These will be the top and bottom pieces of the boat stand
- Drill four holes equally spaced apart on each long side of both rectangles of plywood
- These holes should be big enough to fit the dowel rods through snugly
- Insert the dowel rods through the holes on one rectangle of plywood so that they protrude evenly on both sides
- This will be the top piece of the boat stand
- Place the other rectangle of plywood underneath so that the dowel rods poke through its holes as well
- This is now the bottom piece of your boat stand assembly
- Secure both pieces together by screwing L-brackets into each end where the dowel rods cross over from one piece of plywood to another
Credit: www.modelgasboats.com
-What is the Best Way to Build a Rc Boat Stand
If you’re looking for the best way to build a RC boat stand, you’ve come to the right place. In this blog post, we’ll go over everything you need to know in order to build a sturdy and reliable RC boat stand.
First things first, you’ll need to gather some supplies.
For this project, you’ll need:
-4×8 sheet of plywood
-2x4s (8ft length)
-1/2 inch PVC pipe (10ft length)
-PVC pipe cutter or saw
-Drill with 1/8 inch drill bit
-Jigsaw with fine tooth blade
-High strength epoxy glue
-Stainless steel screws (1 inch length)
-Sandpaper (80 grit)
With your supplies gathered, it’s time to start building! The first step is to cut your plywood into four equal pieces using the jigsaw.
Once that’s done, take two of the plywood pieces and attach them together using the screws and epoxy glue. Make sure everything is nice and flush before moving on.
DIY RC BOAT STAND | CHEAP AND STURDY | PROBOAT SONICWAKE V2 36
Conclusion
If you’re into RC boats, then you know that a good boat stand is important. It keeps your boat safe and secure when you’re not using it and makes it easy to transport. Here are some tips on how to build a RC boat stand that will last.
Start by finding a sturdy piece of plywood. The thicker the better – at least 3/4 inch thick. Cut it to the size you need, making sure to leave enough room for your boat plus a few inches on each side.
Next, use some L-brackets or corner braces to reinforce the corners of your plywood sheet. This will help keep the stand from wobbling later on.
Now it’s time to add some legs.
You can either use pre-made table legs or get creative and use something else like PVC pipe or even old broom handles! Just make sure whatever you use is firmly attached to the plywood so your stand won’t tip over easily.
Finally, give your stand a coat of paint or sealer if you want, then let it dry completely before adding your boat.
And that’s it – now you have a sturdy, homemade RC boat stand that will serve you well for years to come!